新闻中心/News Center

The transmission of noise mainly relies on air, buildings, and the ground, with the main way being through the air. If there is increased sound interference around, the relative sound will be affected; Font family: Song typeface; mso-ascii-font-family:calibri; >Multiple refractions and reflections result in a gradual decrease in decibels of sound as the number of reflections and distance increase. The sound of water splashing, fan noise, and pump vibration are all different, and the frequency of the noise is also different.

There is a wide range of options for sound interference, including fiberglass, aluminum alloy, and brick walls, which can be selected based on their characteristics. When designing fiberglass and aluminum alloy, the curvature of the night song should be designed accordingly; Font family: Song typeface; mso-ascii-font-family:calibri; >Reflect the sound downwards, making it reflect downwards. The brick wall is designed with a sand surface, which has a lot of surface noise and can reflect the sound from different angles for a long time.

Fan noise: The higher the fan speed, the louder the noise. Increasing the air volume and reducing the speed can reduce the noise. If the budget is sufficient, you can replace the large blades with low speed.

Pump noise: Install soundproof cotton outside the pump to reduce noise without affecting heat dissipation.

Drinkling sound: Only the sound of water entering one side of the cross flow cooling tower and the convection with the air outlet will reduce the propagation of noise; There will be air intake grilles around the bottom of the counter current cooling tower, which will be sprayed; Font family: Song typeface; mso-ascii-font-family:calibri; >The sound of water and the incoming air from the air inlet form convection, which also reduces the propagation of noise.